Buying Guide | PANAVISE 350 Multi-Purpose Work Center

Introducing the Panavise 350 Multi purpose work centre, Perfect for home repair or hobby needs! Self-centering, extra-wide opening jaws open a full 9-Inch (228. 6mm) and hold heavier objects by centering weight over base. Includes six non-marring, anti-skid pads. Double-action jaws open/close quickly. Can be reversed to provide zero closure. From the Manufacturer The PanaVise 350 multipurpose work center is a compact work-holding tool bundle designed to hold larger, heavier objects. The 350 multipurpose work center features a head that opens up to 9, removable neoprene jaw pads, and a tray mount with six built-in parts wells. The all-in-one compact work station for holding larger, heavier objects. The 376 vise head opens up to 9, and has double-action jaws. This configuration allows for fast opening and closing, as both sides of the jaws move simultaneously when the vise is cranked. The jaws self-center, which ensures a good fit against items, and allows the contact points of jaws to be reversed, providing 'zero' closure when a user needs to secure very small items. One side of the pads has multiple grooves designed for flat surfaces, while the other has a wide V groove to hold round objects. The 4-5/16 tray diameter and weight (1.4 lbs. ) add to the overall stability. The 312 parts tray mount contains six integrated part wells with rounded edges that ease parts grasping. The tray also contains three pre-drilled and tapped 1/4-20 holes to secure additional accessories. Tilt, Turn and Rotate Functionality The PanaVise PanaVise 350 multipurpose work center utilizes PanaVise single knob split-ball functionality at the point of contact between its base and vise head attachment. Once an item is secured within the head, the base's the split-ball adjustment system allows for maneuvering along three separate planes. The complete mobility range is a 90-degree tilt to the side, along with either an angled rotation or a level turn range of 360 degrees. This range of mobility allows a user to rearrange a work item into any position, and eliminates the need to adjust the overall position of the work station. A 9 jaw opening, reversible jaw contact points and adjustability along three planes (soldering iron holder not included). The parts tray base mount ensures that small items are accessible. Additional Head Options Although the PanaVise 350 multipurpose work center is intended for use with the included 376 extra wide opening vise head attachment, it is also compatible with a range of other vise head accessories. Key Features Components designed for holding larger, heavier objects Wide jaws open up to 9 Double-action jaws open and close quickly and can be reversed to provide 'zero' closure Load control knob allows adjustment in all three axes (90-degree tilt, 360-degree rotation and 360-degree angled turn) Base accepts all 300 series vise heads, or any 5/8 diameter shaft Parts tray base mount adds stability, has six rounded parts trays, and six non-marring, anti-skid pads Specifications Overall 376 Extra Wide Vise Head 300 Standard Base 312 Tray Base Mount Height: 7-7/8 (200 mm) Weight: 5 lbs. (2.3 kg) 3-plane adjustability Rotation: 360 degrees Turn: 360 degrees Tilt: 90 degrees Height: 5-1/4 (133.3 mm) Weight: 1.9 lbs. (0.9 kg) Length: 11-1/2 (292.1 mm) Post/Stem diameter: 5/8 (15.9 mm) Jaw range: 0 to 9 (228.6 mm) Jaw pads: Neoprene; removable; 1-7/8 (47.6 mm) high x 1-1/2 (38.1 mm) wide Height: 3-3/4 (95.2 mm) Weight: 1.4 lbs. (0.6 kg) Diameter: 4-5/16 (109.5 mm) Shaft diameter accepted: 5/8 (15.9 mm) Bolt circle countersunk for three 1/4 flathead screws Height: 3/4 (19.1 mm) Weight: 1.9 lbs. (0.9 kg) Diameter: 8-1/2 (215.9 mm) Part wells: 6 Holes: 1/4-20 holes pre-drilled and tapped for base and soldering accessory attachment Nonskid pads: 6 PanaVise 312 parts tray base mount Limited Lifetime Warranty All PanaVise products are warranted against defective materials and/or workmanship to all original consumer owners from the date of original consumer purchase for the lifetime of ownership by the original consumer owner. will, without charge, repair or replace, at its option, the defective product within 60-days from the receipt of the defective product. The Warranty does not apply to damage not resulting from defective materials and/or workmanship while in the possession of the original consumer or to unreasonable use by the original consumer, which includes but is not limited to improper installation, or failure to provide reasonable and necessary maintenance. About PanaVise Founded in 1957 by tool and die maker Otto Colbert and currently headquartered in Reno, Nevada, PanaVise is a leader in work-holding products. Over the years, a natural outgrowth of this expertise has been continued development of other items which hold things securely and offer a wide range of motion. Important areas in which this has been applied include, Electronics, CCTV Camera Mounts, and Audio/Video Mounts, earning PanaVise the nickname the the hold it anywhere you want it company. Self-centering, extra-wide opening jaws open a full 9-Inch (228.6mm) and hold heavier objects by centering weight over base Parts Tray Base Mount adds stability [8.5 (215.9mm) diameter] and has six individual trays to neatly hold small parts and tools