Pyle - - Pyle Phono Turntable Preamp - Mini Electronic Audio Stereo Phonograph Preamplifier With RCA Input, RCA Output & Low Noise Operation Powered By 12 Volt DC Adapter - PP999 , Black

Product Description PylePro Model : PP999 Compact Ultra-Low Noise Phono Turntable Compact Ultra-Low Noise Phono Turntable Preamp with 12-Volt Adaptor - Preamplifier Converts Phono Signals to Line Level Signals 12-Volt DC 110V Adaptor Included Dedicated RCA Connectors Output Level: 2V Reference Voltage: 1V S/N Ratio (with A-WTD): 70 dB T.H.D. : 0.08 for 1 KHz 3 mV Input Frequency Response:20 Hz ~ 20 KHz ±2dB Input Sensitivity / Impedance / Phono - 3 mV / 50K Ohms This electronic preamplifier stands up to the test and will provide you with serious sound performance. It'll take your audio signal, amplify its strength and prepare it for further processing by your receiver or amplifier. Preamps technically provide voltage gain to your desired equipment and are key to assisting the signal source. The ultra-low noise audio conditioning circuitry allows the preamp to boost audio to levels that are more manageable for various types of audio equipment. Preamps can sometimes come built into the stereo equipment, but if that's not the case, the PP999 is an easy install, wise choice and great addition to any musician or producer. From the Manufacturer Turntable / Phono Pre-Amplifiers Noise / Hum Eliminators Jacks RCA & 1/4'' RCA & 1/4'' RCA 1/4'' TRS 1/4'' TRS & XLR & 12V DC Adaptor ✔ ✔ ✔ CONVERTS PHONO SIGNALS: A turntable preamp that converts phono signals to Line Level Signals. This state-of-the-art circuitry phono preamp can accommodate magnetic pickups with an input sensitivity of 3mV at 50K Ohms The output is 2V max (P-P) at 10K Ohms. It’s better to position the preamp close to the source to reduce unwanted noise and interference For the receiver, this can be connected to speakers, computers, laptops and more Connect the turntable to the RCA inputs and ground. Then, connect the amplifier receiver to the RCA outputs